MIL-STD-810H Testing for Rugged Computers: What to Ask For

A rugged computer used on a vibrating forklift faces a different load from a tablet carried outdoors and sometimes dropped onto concrete. MIL-STD-810H gives engineers a framework for selecting environmental tests that match those exposures. At Emdoor IPC, we recommend turning the shorthand on the datasheet into a list of operating conditions and supporting evidence for the exact configuration being quoted.

Match the test to the way the device is used

Ask which revision, method and procedure were used, with the severity, duration and acceptance criteria. For shock and drops, check the drop height, surface, orientations and whether function was checked during or after the test. For vibration, ask about axes, duration and the way the unit was mounted. For temperature, distinguish storage from operation and check what the computer was doing at the test temperature. For a vehicle project, the bracket, cables and dock may affect how closely the setup represents your installation.

An Emdoor rugged device restrained with straps on a vibration test platform
An Emdoor vibration-test setup. Record how the unit was restrained and mounted when comparing test reports.

Read the test report and IP rating together

MIL-STD-810H covers selection and tailoring of environmental tests. The scope varies by product and test plan, so the standard’s name alone does not identify the methods passed. The enclosure’s IP rating addresses ingress protection under IEC 60529. Confirm which enclosure surfaces are rated and whether ports had to be covered during testing. Separate any EMC, hazardous-location or vehicle power requirements in your procurement specification.

Ask for evidence before finalizing the purchase

Record the model and hardware revision, accessory and mounting configuration, relevant report number, test laboratory, and any conditions or deviations. Then identify what a pilot should verify in your actual operating environment. If the purchased configuration uses a different mount or cable arrangement, review which test results still apply. The DLA ASSIST listing for MIL-STD-810 provides the standard’s official scope and revision history.

Browse Emdoor IPC hardware and our downloads, or send us your operating conditions and evidence requirements so we can identify the relevant product documentation.

Leave a Reply

Your email address will not be published. Required fields are marked *

Head Office

16th/17th Floor, Emdoor building, No. 8 Guangke 1st Road, Pingshan District, Shenzhen

marketing.info@emdoor.com

Tel :+86-755-2372-2880
WhatsApp :+86-18740235383

Contact Form Demo